Instructions

How to use InfinityWeapons glow in the dark weapons.

Glow Nunchaku instructions

To activate glow sticks, remove rubber caps near strings. Pull string to the side and remove glow stick. To activate glow sticks, bend until you hear a crack & then shake. Reinsert glow sticks with the largest end down, then replace rubber cap. String length can be shortened by adjusting the knot. Do not remove caps or plugs from the bottom. Warranty and Disclaimer: Do not remove the light diffusing inserts inside of the tube to prevent biocompatibilty damage between the tubes and glow sticks. This voids the warranty offered on products against factory defects. We are not responsible for any injuries related to the use of our products. User assumes all risks. Discard glow sticks when they are done glowing.

Glow Escrima instructions Remove necklace connectors from the glow sticks. Bend to activate glow sticks. Insert 4 glow sticks into each escrima. Slide tip caps full onto the end of the escrima. Do not remove light diffusing inserts from weapon. Discard glow sticks when done glowing.
Glow Staff instructions

Remove necklace connectors from glow sticks and bend to activate. Insert 4 glow sticks into each end of the glow staff. Slide tips caps fuly onto each end of the glow staff. Remove and discard glow sticks when done glowing.

Glow Saber instructions

Remove necklace connectors from glow sticks and bend to activate glow sticks. Glow sabers use 4 glow sticks. Discare glow sticks when done glowing.

Infinity LED Saber instructions

Remove bottom cap, unscrew button from light. Discard plastic disc from battery contact area. Remove light, insert color discs for desired color. Mix and match color discs to customize the color of your saber! Replace light, bottom cap, activate with button. 3x AAA batteries are included and installed. Lasts 2-3 hours at max brightness, but can be used 5-10 hours of continuous use. To replace batteries, remove bottom vinyl cap, unscrew button from internal light. Entire battery unit slide outs, allowing replacement. Install batteries facing correct directions in each compartment. When inserting battery unit back into light, install the positive (plus) side in first. Replace threaded button and bottom vinyl cap before use. Product is designed for impact within reason. We are not responsible for any injuries related to the use of our products. User assumes all risks.

22 inch glow stick instructions

When you are ready to use your glow weapons, remove glow necklace connectors and bend glow sticks to activate. Glow staffs will use 4 in each end. Glow escrimas will use 4 in each weapon. Glow sabers will use 4 glow sticks. Discard glow sticks when done glowing.

Custom Grips by InfinityWeapons

Do not store this wrapped grip touching other similar grips, as it is self bonding and may stick to other grips. Once it has broken in after a few weeks of use, there is less chance of it sticking to another grip. Also note on the colored grips there is a strip of half inch wide clear tape on each end. This can be removed after a couple weeks of use. It is just temporary to prevent the new grip from rolling over and sticking to itself.